no spark from coil

allinkees · Post by **allinkees** » Fri May 22, 2015 11:13 pm

I have 89 Mazda 929 that I van not get the coil to send spark to the distributor. Have replaced the coil. Will the igniter cause the coil not to send fire to the plugs?

Matsuda9 · Post by **Matsuda9** » Sat May 23, 2015 12:32 am

Yes it can, but also i would check wiring and connector plugs, lack of signal could have an effect as well.

allinkees · Post by **allinkees** » Mon May 25, 2015 11:01 pm

I have checked all the connectors at the coil and the igniter. Have voltage at one plug on the coil and voltage at two plugs on the igniter. Now where can I go to figure out why I'm not getting fire from the coil.

allinkees · Post by **allinkees** » Mon May 25, 2015 11:03 pm

Sorry about that advartar I used lol

allinkees · Post by **allinkees** » Thu May 28, 2015 4:01 pm

I still need as much help as I can get on this car Thank you

Matsuda9 · Post by **Matsuda9** » Fri May 29, 2015 11:59 am

How is your dizzy? if the voltages where they supposed to be, so is coil send the spark to the dizzy?

i am wondering and it might be farfetched, but it could be crank angle sensor that is in the dizzy, is your timing belt fine?

no spark from coil

no spark from coil

Re: no spark from coil

Re: no spark from coil

Re: no spark from coil

Re: no spark from coil

Re: no spark from coil